Gianneschi JET 4 B CE Spares Kits

These are the individual parts included in the kit, please check the kit part number is correct:

KZJET4CE01 – Kit Ric. JET 4 B CE 24V CC

• 15CE122 – Control-Press C.E. 122 (24V CC) 2.2 BAR 1'' (1 Piece)
• 15MRD506P – Pressure Gauge D.50 – 0–6 ATE (1 Piece)
• 15RELE1 – Relè 24 VCC M24063 Contactor 100A (1 Piece)
• RJET1 – Impeller Key x JET 1-3-4, 4x4x12 (1 Piece)
• RJET12 – O'Ring x JET 1-3-4 (1 Piece)
• RJET18 – Splash Guard Ring x JET 1/3/4–MV 44G Shaft D.14 (1 Piece)
• RJET20 – Seeger x 1–4 JET per Shaft (1 Piece)
• RJET41 – Impeller per JET 3/4 Diam. 130mm (1 Piece)
• RJET42 – Venturi per JET 4 (1 Piece)
• RJET43 – Diffuser per JET 3/4 (1 Piece)
• SGM41A – Brush GM4 10x18x19 with Protected Tail (4 Pieces)
• TMD12Z – Mechanical Seal D.12 x7x72Z7 Inox 316 Roten (1 Piece)

KZJET4CE02 – Kit Ric. JET 4 B CE 220V Mono 50Hz

• 15CET2 – Control-Press C.E. Tarabile (230V CA) 1" (1 Piece)
• 15MRD506P – Pressure Gauge D.50 – 0–6 ATE (1 Piece)
• CUF20 – Capacitor MF 20 (1 Piece)
• RJET1 – Impeller Key x JET 1-3-4, 4x4x12 (1 Piece)
• RJET12 – O'Ring x JET 1-3-4 (1 Piece)
• RJET18 – Splash Guard Ring x JET 1/3/4–MV 44G Shaft D.14 (1 Piece)
• RJET20 – Seeger x 1–4 JET per Shaft (1 Piece)
• RJET41 – Impeller per JET 3/4 Diam. 130mm (1 Piece)
• RJET42 – Venturi per JET 4 (1 Piece)
• RJET43 – Diffuser per JET 3/4 (1 Piece)
• TMD12Z – Mechanical Seal D.12 x7x72Z7 Inox 316 Roten (1 Piece)

KZJET4CE03 – Kit Ric. JET 4 B CE 230/400V Tr. 50Hz

• 15CET2 – Control-Press C.E. Tarabile (230V CA) 1" (1 Piece)
• 15MRD506P – Pressure Gauge D.50 – 0–6 ATE (1 Piece)
• RJET1 – Impeller Key x JET 1-3-4, 4x4x12 (1 Piece)
• RJET12 – O'Ring x JET 1-3-4 (1 Piece)
• RJET18 – Splash Guard Ring x JET 1/3/4–MV 44G Shaft D.14 (1 Piece)
• RJET20 – Seeger x 1–4 JET per Shaft (1 Piece)
• RJET41 – Impeller per JET 3/4 Diam. 130mm (1 Piece)
• RJET42 – Venturi per JET 4 (1 Piece)
• RJET43 – Diffuser per JET 3/4 (1 Piece)
• TMD12Z – Mechanical Seal D.12 x7x72Z7 Inox 316 Roten (1 Piece)

If the spares kit is not in stock, it will be approximately a 2–4 week lead time from the factory.
Please contact Nauticool to purchase this kit or the individual spares.